Caring for your computer
The FTD tape drive
You should clean the read/write head and the capstan of the
FTD frequently to prevent the accumulation of dust and
metallic particles.
If you notice read or write errors, or many bad blocks when
using the drive, be sure to clean the head and capstan
thoroughly before concluding that the drive or your tapes
are defective.
The read/write head and the capstan are accessible through
the flip-up drive door, as shown below.
Although it is possible to use special kits to clean the drive, it
is recommended that you use 90% isopropyl alcohol and
several non-abrasive, lint free swabs, as follows:
6/4 XEN OWNER'S HANDBOOK
7.
Put the ball back in its socket and replace the plastic
cover. It should click into place.