Configuring System Settings - Arris Touchstone WTM552 User Manual

Getting
Safety Started
Jump directly to one of the following topics:
• Configuration Basics
• Accessing the Configuration Interface
•

Configuring System Settings

• Setting Up Your WAN Connection
• Setting the MAC Address
• Setting Up DNS
• Configuring the LAN Channel and Name
• Configuring Wireless Security
• Configuring the Firewall
— Configuring Virtual Servers
— Configuring Client IP Filters
— Configuring MAC Address Filtering
— Configuring the DMZ
• Configuring DDNS
• Configuring Wireless Bridging
Battery
Installation Installation
Wireless Ethernet
Configuration Configuration
Configuring System Settings
1 Click the Utilities link (at the bottom of the Navigation menu) to open the
Utilities menu, then click System Settings to access the System Settings
screen:
2 Make changes as follows:
— Enter Current Password: If you have already created a password, and
you want to change settings on this screen, enter the password here.
— Enter New Password: Enter a password that you will remember but is not
easy to guess.
— Confirm new Password: Enter the same password again.
— Time Zone: Select the proper time zone for your location. The Telephony
Modem uses an Internet time server to set its internal clock.
3 Scroll down to the bottom of the page and click the Save button. If you are
prompted to log in again, type your new password and click the Submit but-
ton.
4 Proceed to Setting Up Your WAN
Touchstone® WTM552 Telephony Modem User's Guide
Usage Troubleshooting
Connection.
Glossary
30