Page 1
Get ready to experience the Internet’s express lane! Whether you’re checking out streaming media, downloading new software, or checking your email, the Touch- stone CM450 Cable Modem brings it all to you faster and more reliably. The high- speed, always-on connection won’t keep you waiting.
Page 2
Users must take full responsi- bility for their applications of any products specified in this document. The information in this document is proprietary to ARRIS.
Usage Troubleshooting Glossary Safety Requirements ARRIS complies with the applicable requirements for performance, construction, la- beling, and information as outlined below: • Do not use the Cable Modem near water (i.e. wet basement, bathtub, sink or near a swimming pool, etc.). Avoid pouring or spilling liquids on the Cable Modem.
Page 4
Directive (73/23/EEC), and the CE Marking Directive (93/68/EEC). As such, this product bears the CE marking in accordance with the above applicable Direc- tive(s). A copy of the Declaration of Conformity may be obtained from: ARRIS, 3871 Lake- field Drive, Suite 300, Suwanee, GA 30024. Home...
Usage Troubleshooting Glossary Getting Started About Your New Cable Modem The Touchstone CM450 Cable Modem is a DOCSIS 2.0 (A-TDMA and S-CDMA) ready cable modem with the following features: • Speed: much faster than dialup or ISDN service • Convenience: supports USB 1.1 and Ethernet; both can be used simulta- neously •...
Page 6
Information packet: your cable company should furnish you with a packet containing information about your service and how to set it up. Read this information carefully and contact your cable company if you have any ques- tions. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 7
Ethernet connection only: System 7.5 to MacOS 9.2 (Open Transport recommend- ed) or MacOS X Linux/other Unix Ethernet connection only: Hardware drivers, TCP/IP, and DHCP must be enabled in the kernel Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 8
Modem’s USB port and one or more to the Ethernet port. To connect two or more computers to the Ethernet port, you need a hub or broadband router (available at computer retailers). For more information about connecting two or more computers, contact your cable service provider. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 9
(for the same reason that you should run only secured proxies). Consult the documentation and technical support of the wireless equipment provider for help. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 10
Do you have any special system requirements or files that I need to down- load after I am connected? • When can I start using my Cable Modem? • Do I need a user ID or password to access the Internet or my e-mail? Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 11
Standby button on top of the Cable Modem); on when the Ca- ble Modem is connected to the Internet. Power: blinks when the Cable Modem is setting up; on steadily when ready for use. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 12
Cable Modem to a PC or home net- work LAN. D Reset button: resets the Cable Modem as if you disconnected power. Use a pointed non-metallic object to press this button. Cable: plug the coax cable in here. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 13
Cable Modem from pulling out of the wall in the future. To prevent overheating your Cable Modem, do not block the ventilation holes on the sides of the unit. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 14
If you want to stand the Cable Modem up on its side, pull the oval foot out slightly, twist the foot (as shown), and place the Cable Modem in the desired location. Proceed to Connecting the Cable Modem. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 15
USB port on the back of the Cable Modem. Your PC should detect the Cable Modem and begin installing the drivers. See Installing USB Drivers on Your PC for driver installation details. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 16
Select the link for your operating system to see the installation instructions. • Installing USB Drivers on Windows 98SE • Installing USB Drivers on Windows 2000 • Installing USB Drivers on Windows XP • Installing USB Drivers on Windows ME Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 17
Plug the appropriate end of the USB cable into the Cable Modem and the other end into the computer’s USB port. The following window appears, indicating that the PC has detected a new USB device: Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 18
Wait for the system to start the Add New Hardware Wizard and display the following window (there may be a short delay): Select “Search for the best driver” and click the Next button. The wizard displays a list of search options: Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 19
Select “Specify a Location,” then choose the drive letter that corresponds to the CD drive from the menu. d. Click the Next button. You should now see the screen shown above. If not, contact your cable company for help. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 20
Safety Getting Started Installation USB Drivers Usage Troubleshooting Glossary Click the Next button. The wizard installs the drivers, then displays a window indicating that the installation is complete. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 21
The following window appears, indicating that the PC has detected a new USB device: Wait for the system to start the installation wizard and display the following window (there may be a short delay): Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 22
Glossary Click the Next button. The wizard prompts you for the location of the drivers. Note: The dialog indicates that the wizard is looking for the ARRIS RNDIS (Remote Network Device Interface Specification) driver for the Cable Mo- dem. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 23
Safety Getting Started Installation USB Drivers Usage Troubleshooting Glossary Select “Search for a suitable driver...”, then click the Next button. The wizard displays a list of search options. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 24
Select “Specify a Location,” then choose the drive letter that corresponds to the CD drive from the menu. d. Click the Next button. You should now see the screen shown above. If not, contact your cable company for help. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 25
Getting Started Installation USB Drivers Usage Troubleshooting Glossary Click the Next button. The wizard installs the drivers, then displays a window indicating that the installation is complete. Click the Finish button. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 26
Plug the appropriate end of the USB cable into the Cable Modem and the other end into the computer’s USB port. The following window appears, indicating that the PC has detected a new USB device: Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 27
Select “Search for the best driver” and “Search removable media,” then click the Next button. The wizard installs the drivers, then displays a window indicating that the installation is complete. Click the Finish button. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 28
The following window appears, indicating that the PC is installing drivers for a new USB device: When the window disappears, installation is complete. Contact your cable company if you see an error message of any kind. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Setting up Your Computer to Use the Cable Modem Follow the instructions in the information packet supplied by your cable company. Contact your cable company if you need help setting up your computer. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Ethernet link disconnected (i.e. equip- ment is disconnected or powered off) Ethernet link connected, no traffic Blink Ethernet data activity with connected equipment Using the Standby Button for more information about the standby mode. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 31
Self Test failed Blink Blink Scanning for downstream RF carrier Blink Initial ranging in progress Blink Blink Obtaining data IP address (DHCP) Blink Downloading data configuration (TFTP) On/Blink On/Blink Data registration complete Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 32
Online light blinks to indicate active mode. The Cable Modem remembers the standby setting when you reset the Cable Modem or turn it off. The Standby button has no effect while the Power light is blinking. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Cable Modem and CATV outlet, remove the splitters and connect the Cable Modem directly to the outlet. Proceed to the Ethernet or USB solutions (next page) if necessary. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 34
ARRIS cable modem driver. To correct this: • Disconnect the USB cable between the PC and the Cable Modem. • Use the ARRIS Uninstall utility (on the ARRIS driver CD) to remove the improperly-installed driver. • Reboot the PC. •...
Page 35
I have two PCs connected to the Cable Modem, but only one can get on the Internet. Check your cable company’s terms of service: they may allow only one com- puter to connect directly to the Cable Modem. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 36
Start the uninstall utility on your CD-ROM. Follow the on-screen instruc- tions carefully. d. Reconnect the USB cable. e. Re-install the USB driver as shown in Installing USB Drivers on Your Replace the USB cable. Call your cable company for help. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
(such as www.example.com) with an IP address. Downstream In an HFC network, the direction from the head-end to the subscriber. Some older cable documentation may refer to this as the forward path. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 38
USB card in your computer. IP address A number assigned to your computer by your cable company, used to iden- tify your computer to other systems on the Internet. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 39
A standard 4-pin modular connector, commonly used in North America for connecting telephones. RJ-45 A standard 6-pin modular connector, commonly used on Ethernet cable. An RJ-45 connector looks like a wide RJ-11 (telephone) connector. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...
Page 40
(such as cable modems) to a single PC. WHQL Windows Hardware Qualification Labs. A division of Microsoft that certifies hardware as being compatible with Windows operating systems. Home Prev Next Touchstone CM450 Cable Modem User’s Guide...