Configuring Your Ethernet Connection; Requirements; How To Use This Chapter; Tcp/Ip Configuration For Windows Vista - Arris SURFboard TM822R User Manual

Configuring Your Ethernet Connection

If your computer is equipped with a LAN card providing an Ethernet connection, you may
have to configure your computer's TCP/IP settings. The steps that follow will guide you
through setting your computer's TCP/IP settings to work with the Telephony Modem.

Requirements

Make sure you have the following before attempting to configure your Ethernet connection:
Computer with Ethernet interface.

Ethernet cable (supplied).

IP address, subnet, gateway, and DNS information for installations not using DHCP.


How to use this Chapter

The following list shows the procedures for modifying the TCP/IP settings on the computer.
The procedure is slightly different depending on the operating system that you are using.
Please ensure you are using the correct steps for the operating system on your computer.
Follow the links below for instructions to configure your Ethernet connection on your
operating system.

TCP/IP Configuration for Windows Vista


TCP/IP Configuration for Windows 7, Windows 8, or Windows 10

TCP/IP Configuration for Mac OS X

TCP/IP Configuration for Windows Vista
Follow these steps to configure the Ethernet interface on a Windows Vista operating system.
1. Open the Vista Control Panel.
2. Double-click
Window.
3. Click Manage network
Connection.
The Network Connections window displays.
STANDARD PN 365-095-31188 x.1
© 2016 ARRIS Enterprises LLC. All Rights Reserved.
Network and Sharing Center
connections. If prompted for a connection, choose
TM822R DOCSIS® 3.0 Telephony Modem For Customers User Guide
(page 31)
(page 32)
to display the Network and Sharing Center
Chapter 6
(page 32)
Local Area
31