Arris Touchstone WTM552 User Manual page 16

Getting
Safety Started
Receiver
Slots
Battery
Installation Installation
Battery
Pull Strap
Battery
Opening
Hinge Tabs
Wireless Ethernet
Configuration Configuration
Push the battery pack into the bay until it latches into place. The diagram
3
shows a Telephony Modem with a 4.4 Ah Lithium-Ion battery pack installed.
If you are taking the battery out of the unit, make sure to use the
battery pull strap to dislodge the battery.
The Telephony Modem will not begin operating until you apply AC
Note:
power.
Replace the door. To do so, place the tabs of the battery door into the slot
4
on the Telephony Modem battery compartment. Rotate the door toward the
unit until the latch snaps back into place.
The Lithium-Ion battery pack contains precious material, so there
Note:
may be some benefit in recycling. Please dispose of the battery responsibly
and in accordance with local ordinances.
Touchstone® WTM552 Telephony Modem User's Guide
Usage Troubleshooting Glossary
16