Arris Touchstone WTM552 User Manual page 41

Getting
Safety Started
Battery
Installation Installation
Wireless Ethernet
Configuration Configuration
Configuring Virtual Servers
Follow these steps to allow outside access to servers on your internal network.
1 Click the Firewall link in the navigation menu, then click Virtual Servers.
The Virtual Servers window appears.
2 Proceed as follows:
If you want to...
Add a well-known service Choose the desired service from the Add
Add a custom service
Enable or disable a
service
Remove a service
3 Click the Save button at the bottom of the page (you may need to scroll
down) to save your changes.
4 Proceed to Configuring Client IP
Touchstone® WTM552 Telephony Modem User's Guide
Usage Troubleshooting
Then ...
drop-down menu and then click the Add
button.
Fill in a row as follows:
• Description: the service name.
• Inbound port: the beginning and ending
ports of the range required to support
this service. These are the ports that
outside clients use to access your server.
• Type: Choose TCP or UDP. If the service
requires passing both TCP and UDP
packets, you must create a second row.
• Private IP address: the IP address of the
server on your internal network.
• Private port: the beginning and ending
ports of the range required by this ser-
vice. The private ports may be different
from the Inbound ports.
Check (or clear) the box in the Enable column
next to the service.
Choose the row to remove in the Clear Entry
drop-down menu and click the Clear button.
Filters.
Glossary
41