Arris Touchstone WTM552 User Manual page 43

Getting
Safety Started
Finding the MAC Address of a computer
Locate the operating system of the computer that you
want to add to the list and follow the instructions to find
its wireless MAC address.
Windows: open a Command Prompt window and type
ipconfig /all (and press Return). Locate the line that
begins with "Description" and contains the word "Wire-
less." The next line, which starts with "Physical Address,"
contains a string of six hex numbers, separated by
dashes. This is the MAC address.
MacOS X: open a Terminal window and type ifconfig
(and press Return). Find the line that begins with "en1"
— this is the wireless adapter. The next line that begins
with "ether" contains the MAC address of the wireless
interface.
Linux: open a shell window and type ifconfig (and press
Return). The wireless interface is eth1 (unless there is no
Ethernet adapter, in which case the interface is eth0).
Battery
Installation Installation
Wireless Ethernet
Configuration Configuration
Configuring MAC Address Filtering
Follow these steps to configure MAC Address filtering.
1 Click the Firewall link in the navigation menu, then click MAC Address Filter-
ing.
The MAC Address Filtering window appears.
2 Click the Add button to add a blank row to the filter list.
3 Enter the MAC address of the computer you want to add to the filter. Do not
enter colons or dashes in between the hex digits. See the sidebar for infor-
mation about finding the MAC address of a computer.
Note: Make sure you enter the MAC address correctly. The Telephony Mo-
dem may completely block access if you enter an incorrect address.
4 Click the Save button to save your changes.
5 Proceed to Configuring the
Touchstone® WTM552 Telephony Modem User's Guide
Usage Troubleshooting
DMZ.
Glossary
43