Table of Contents
Advertisement
Call
9
Monitor
(RCA)
10
Audio Out
Ethernet
11
Port
1.2 Rear Panel
No. Name
DC Power
1
Input
2
Audio Input
12VDC Power
3
Outputs
Call Monitor
4
(CVBS)
Antenna
5
Ports
6
Video Input
By default, this port is set to a Call monitor output. Connects to a Call
monitor using a RCA cable.
Note: You can optionally switch this port from Call monitor to Main monitor.
Please refer to 2.6 Monitor Connection in the User's Manual.
RCA audio output for connecting to the speakers. The audio output only
works during playback. Speakers with a (built-in) amplifier and external
power supply are required.
One RJ-45 port for connecting to the network.
1
2
Description
Use the supplied Power Harness Cable for connecting to 9 ~ 36VDC power
source. For details, please refer to 2.5 Power Harness Cable.
D-Sub connector for connecting to the supplied Audio Cable. For details,
please refer to 2.4 Audio Cable / Video Cable / Power-Out Cable.
Microphones with a (built-in) amplifier and external power supply are
required.
A total of 12VDC, 5A power supply to the connected cameras. Please refer
to 2.4 Audio Cable / Video Cable / Power-Out Cable.
By default, this port is set to a Call monitor output. Connects to a Call
monitor using a BNC cable.
Note: You can optionally switch this port from Call monitor to Main
monitor. Please refer to 2.6 Monitor Connection in the User's Manual.
Connects to the 3G/4G or WiFi Antenna for using 3G / 4G LTE / WiFi
function.
M12 connector for connecting to the supplied Video Cable. You can then
connect cameras to the Video Cable. Please refer to 2.4 Audio Cable / Video
Cable / Power-Out Cable.
3
4
5
6
2
7
8
Advertisement
Table of Contents
