Lvps - Brother HL-4200CN Service Manual

Note:
When replacing the link lever: R, align the spring IDT R and the bottom of link lever: L
with the positions shown in the figure (lever drum: L replacement).
2.5.9

LVPS

1) Remove the three connectors from the LVPS.
2) Remove the clamp guide harness.
3) Remove the harness from the guide harness SW.
Clamp guide harness
Harness
Gear IDL. press
Gear press R
Fig.4-109
Guide harness SW
Clamp guide harness
Fig.4-110
- IV-61 -
Link lever: R