Fan Motor Assy - Brother HL 1240 - B/W Laser Printer Service Manual

3.17 Fan Motor ASSY

NOTE:
Be sure to remove the fixing unit and disconnect the fan motor connector on the engine PCB
before removing the fan motor ASSY.
(1) Place the main frame so that the fan motor ASSY is at the top.
(2) Remove the two M3x6 Taptite screws securing the fan cover.
(3) Remove the fan motor ASSY with the fan cover and remove the fan motor ASSY from the
cover.
Taptite, cup M3x6
Fan cover
Main frame
NOTE:
When re-assembling the fan motor, fix the harness into the groove on the motor, then fix the
motor onto the bosses.
Fan cover
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
Taptite, cup M3x6
Manufacturer sticker side
Fan motor ASSY
Fig. 4-58
Fan motor
(groove)
Fig. 4-59
4-33