Installing Subsequent Nics - 3Com 3C509B User Manual

7 Click OK.
Windows copies files. A message is displayed, warning you
to use the Network screen to install multiple NICs.
8 Click OK.
The setup program copies files, and the Network
screen reappears.
9 Ensure that 3Com EtherLink 10 3C509B ISA is
selected, and then click Properties.
The 3Com EtherLink 10 Adapter Card Setup dialog box
appears, showing the assigned I/O port address value.
10 Click OK, and then click OK again.
The Network screen reappears.
11 Click Close.
The Microsoft TCP/IP Properties screen appears.
12 From the Adapter box, select 3Com EtherLink 10
3C509B ISA Adapter, select a method of assigning
the TCP/IP address, and then click OK.
Messages are displayed, and you are prompted to reboot
Windows NT.
13 Click Yes.
The NIC is installed and configured. The next step is to
install the remaining NICs.

Installing Subsequent NICs

Follow this procedure to install the remaining NICs, one at
a time, after you install and configure the first NIC:
1 Perform steps 1 through 5 of the preceding procedure.
The Windows setup program displays a message warning
that a network card of this type is already installed.
2 Click OK.
The 3Com EtherLink 10 (3c509b) ISA Adapter Bus screen
appears. A message warns you to use the Network window
to install multiple NICs.
3 Click OK.
Files are copied, and the Network screen reappears.
Installing Multiple NICs in a Windows NT PC 79