3Com 3C509B User Manual page 92

If you are using a PC that supports Plug and Play, the IRQ
and I/O base address values are set by Plug and Play. You
can set the boot PROM size to indicate the presence and
size of a network boot PROM. For instructions on disabling
Plug and Play, see
page 41.
Follow these steps to change the configuration settings:
1 Run the installation program described in
"Configuring the
2 From the main menu (see
select Configuration and Diagnostic Program.
3 If multiple NICs are installed in the PC, use the arrow
keys to select the NIC you want to configure. Press
Tab to move to the Select button and press Enter.
4 Press Tab to display the dialog box, and then select
the option that you want to change. Press Enter.
5 Use the arrow keys to scroll through the list of
settings for that option. Select a setting and
press Enter.
6 Continue this procedure for other options. For more
information on a specific option, select the option
and press F1.
7 To save the new settings, select OK and press Enter.
Changing Configuration Settings
"Disabling Plug and Play on the
NIC" on page
Figure 58
85.
on page 82),
91
NIC" on