100
C
HAPTER
Performing Automated Installations
This section describes how to install and configure
3C509B NICs when you want to perform multiple
installations automatically or when you must reinstall
the NIC software because it has been lost or corrupted.
This procedure uses configuration settings saved from a
previous installation.
Installing from the Hard Disk
Follow these steps if the saved configuration settings are in
a file on your hard disk:
1 Click Start in the taskbar, click Run, and then enter the
path to the file that contains the saved configuration
settings that you want to use to reinstall the NIC.
2 Click OK.
The 3Com Installation Wizard starts and displays the
first screen.
3 Click Install.
3Com Installation Wizard screens appear sequentially,
displaying the settings saved in the original installation.
Installing from a Diskette
Follow these steps if the saved configuration settings are in
a file on a diskette:
1 Insert the diskette containing the saved configuration
settings in drive A.
2 Click Start in the taskbar, click Run, and then enter:
a:\
3 Click OK.
The 3Com Installation Wizard starts and displays the
first screen.
4 Click Install.
3Com Installation Wizard screens appear sequentially,
displaying the settings saved in the original installation.
6: T
ROUBLESHOOTING FOR
W
95/98
INDOWS
AND
W
NT
INDOWS