Changing Configuration Settings - 3Com 3C509B User Manual

90 C
HAPTER
Changing Configuration Settings
The NIC Configuration screen
shows the current configuration settings for the installed
NIC. You can change the default settings to:
I
I
I
I
I
Table 8
that option, and other available settings for that option. For
more information about an option, select the option and
press F1.
.
Table 8 NIC Option Settings
Option
I/O Base Address
Interrupt Request
Level
Boot PROM
Transceiver Type
Network Driver
Optimization
Maximum
Modem Speed
(fastest modem
installed)
Plug and Play
Full-Duplex
5: S I
OFTWARE NSTALLATION AND
Disable Plug and Play
Use a boot PROM
Optimize driver performance for a specific
operating system
Optimize driver performance for operation on a server
Change the type of network connector
lists each software option, the default setting for
Default Setting
300h
10
Disabled. Does
not apply for
3C509B-TPO.
Auto Select for all
except 3C509B-TPO
(on-board TP)
Windows or
OS/2 Client
9600 Baud
Enabled
Disabled
C
ONFIGURATION
(Figure 59
Supported Settings
200h, 210h, 220h, 230h, 240h, 250h,
260h, 270h, 280h, 290h, 2A0h, 2B0h,
2C0h, 2D0h, 2E0h, 2F0h, 300h, 310h,
320h, 330h, 340h, 350h, 360h, 370h,
380h, 390h, 3A0h, 3B0h, 3C0h, 3D0h,
3E0h, EISA, ISA
3, 5, 7, 9, 10, 11, 12, 15
Disabled, 8K, 16K, 32K
On-board Coax (BNC), On-board TP
(RJ-45), External (AUI/DIX), or Auto Select
DOS Client, Windows or OS/2
Client, Server
No Modem, 1200, 2400, 9600, 19200,
or 38400 Baud
Enabled, Disabled
Enabled, Disabled
U W 3.
NDER INDOWS
on page 86)
X