Running Tests; Nic Test; Network Test; Uninstalling The Nic - 3Com 3C509B User Manual

98 C
HAPTER

Running Tests

Two tests help you troubleshoot problems with the NIC:
I
I

NIC Test

Run the NIC test to determine that the NIC is working
correctly. Be sure to run this test after you have verified that
the network is functioning.
Follow these steps to run the NIC test:
1 Click Run NIC Test to begin the test.
A progress bar appears. Results are displayed when the test
is completed.
2 Click OK.

Network Test

Run the Network test first if you are experiencing problems
with the NIC. This tests the ability of the 3C509B NIC to
transmit and receive data while connected to the network.
Follow these steps to run the Network test:
1 Click Run Network Test.
The Network Connectivity Test screen is displayed.
2 Click Start to begin the test.
The PC on the network acting as the receiver in this test
is identified on the right side of the screen. Results are
displayed when the test is completed.
To run the test continuously, select the Continuous
check box.
3 Click Close.

Uninstalling the NIC

If you have problems installing NIC software, allow the
3Com Installation Wizard to finish. The installation cannot
be canceled once it is started.
CAUTION: Before attempting to reinstall 3Com NIC
installation software, you must first perform the
uninstallation process.
6: T
ROUBLESHOOTING FOR
NIC test
Network test
W 95/98
INDOWS AND
W NT
INDOWS