To Accept Configuration Settings; To Modify Configuration Settings - 3Com 3C509B User Manual

50 C
HAPTER
To Accept Configuration Settings
Follow these steps to accept the recommended
configuration settings:
1 Click Next.
2 Go to
on
To Modify Configuration Settings
Follow these steps to change configuration settings in a
Windows 95/98 non-Plug and Play PC:
1 Under Network Parameter, select I/O Base Address.
2 In the Set Value selection box, click the scroll arrow
to select the I/O range setting that you wrote down
while following the instructions in
NIC for Windows 95, Version
"Configuring the NIC for Windows
See
3 Under Network Parameter, select Interrupt
Request Level.
4 In the Set Value selection box, click the scroll arrow
to select an interrupt request level that matches
one of the available IRQs that you wrote down
while carrying out the instructions in
Preinstallation
page
5 When you have finished changing the settings,
click Next.
The next step is to test the NIC and the network connection.
3: U 3C
SING THE OM
"Testing the NIC and the Network
page 51.
Figure 28.
Procedure" on
30.
I W
NSTALLATION IZARD FOR
950b" on
page
W 95/98
INDOWS
Connection"
"Configuring the
page 34 or in
98" on page 38.
"Performing the
30. See Figure 7 on