3Com 3C509B User Manual page 47

46 C 2: C
HAPTER
The text displayed in the I/O range screen
varies slightly for Windows 95 and Windows 98. The
essential purpose of the screen is the same for both
operating systems.
9 Write down the I/O range setting displayed in the list
box (or click Print, if you are connected to a printer),
and then click Next.
When you configure the NIC using the 3Com Installation
Wizard, make sure that this setting matches the value
displayed on the NIC Configuration Settings screen.
See Figure 28
Windows copies the required files to your hard disk.
The 3Com Installation Wizard starts.
CAUTION: I/O base address 0x110 is reserved for
system resources. If this address is assigned to a hardware
device in your PC, contact your network administrator
before continuing.
The next step is to use the 3Com Installation Wizard
to install NIC software and configure the NIC. Go to
Chapter
I
USTOM NSTALLATION
on page
3.
S W
ETUP FOR INDOWS
49.
95/98
(Figure 26)