Windows 95/98, And Windows Nt Troubleshooting; Diagnostic Testing Under Windows 95/98 And Windows Nt; Starting The 3Com Nic Diagnostics Program - 3Com 3C509B User Manual

96 C
HAPTER

Windows 95/98, and Windows NT Troubleshooting

A comprehensive section on troubleshooting tips and
techniques is provided in the online Help. To access the
online Help, follow these steps:
1 Click Start in the Windows 95/98/NT taskbar.
2 Select Programs, then 3Com NIC Utilities, and
then 3COM NIC DOCTOR to start the 3Com NIC
Diagnostics program.
The General tab of the 3Com NIC Diagnostics
program appears.
3 Select the Support tab.
4 Click Release Notes.
Diagnostic Testing Under Windows 95/98
and Windows NT
The 3Com NIC Diagnostics program for Windows 95,
Windows 98, and Windows NT is installed on your
hard disk when you install the NIC software.

Starting the 3Com NIC Diagnostics Program

You can start the program by following these steps:
1 Click Start in the Windows 95/98/NT taskbar.
2 Select Programs, then 3Com NIC Utilities, and
then 3COM NIC DOCTOR to start the 3Com NIC
Diagnostics program.
The General tab of the 3Com NIC Diagnostics
program appears.
For Windows 95/98 or Windows NT, you can also follow
these steps to run the 3Com NIC Diagnostics program:
1 Click Start in the taskbar, and then select Run.
The Run dialog box appears.
2 In the Open entry box, type:
tcaudiag
3 Click OK.
Table 9
within the 3Com NIC Diagnostics program.
6: T
ROUBLESHOOTING FOR
shows the various tab screens that are available
W 95/98
INDOWS AND
W NT
INDOWS