Reinstalling Nic Software - 3Com 3C509B User Manual

Follow these steps to uninstall the NIC software in a PC
running Windows 95, Windows 98, or Windows NT.
1 Double-click the My Computer icon, double-click
the Control Panel icon, and then double-click the
Network icon.
2 Select the 3C509B NIC.
I
I
3 Click Remove.
4 Click OK.
The System Settings Change screen appears, prompting
you to restart your PC.
5 Click Yes.
The NIC is no longer recognized by your operating system.
All 3C509B NIC software is removed from your PC.

Reinstalling NIC Software

When an event such as a hard disk crash occurs, the
original configuration file written to the PC hard disk
may be lost or damaged. In this case, you must reinstall the
NIC software for the NIC to be operational.
To reinstall 3Com NIC software for Windows 95, follow
the procedure specified in
Windows 95, Version
To reinstall 3Com NIC software for Windows 98, follow the
procedure specified in
Windows
To reinstall 3Com NIC software using saved settings from
a previous installation, go to the next section.
If you are unable to reinstall the NIC or the NIC software
successfully, see the appropriate troubleshooting sections
in this chapter.
For Windows 95/98 — On the Configuration tab,
select the 3Com EtherLink 10 ISA NIC.
For Windows NT — On the Configuration tab,
select Network adapters, and then select the
3Com EtherLink 10 ISA NIC.
98" on page
Reinstalling NIC Software
"Configuring the NIC for
950b" on page
"Configuring the NIC for
38.
34.
99