Wavion WBS-2400 User Manual page 94

Managing System and Station Security
Table- 6.2
Field
HTTP/CLI Users
User Name
User Type
New Password
Confirm Password
Options
Apply
Save (on menu bar)
Cancel
SNMP Configuration
SNMP Enabled
SNMP Version (V2 or V3)
SNMP Read Community
SNMP Write Community
Options
Apply
Save (on menu bar)
Cancel
Rev 4.0
Management Configuration page
Description
Use to change password or add new users to manage the unit; see
below
When registering a new user, enter user name; user name is case
sensitive
User type is selected when registering a new user
Administrator/Viewer
Use this field to insert new user's password or to change existing
password
When registering a new user, or changing a password, re-enter the
above password to verify that the password is correct.
Click buttons in this section with respect to new and current users
Click to have changes take effect temporarily
Click to have changes made on this page remain even after a
reboot
Click to clear changes made; Cancel only works on changes where
neither Save or Apply was clicked
If checkbox is marked, indicates that SNMP is enabled
Lists SNMP version
SNMP Read and Write community strings authenticate access to
MIB objects and function as embedded passwords
Click buttons in this section with respect to changes made in the
SNMP section
Click to have changes take effect temporarily
Click to have changes made on this page remain even after a
reboot
Click to clear changes made; Cancel only works on changes where
neither Save or Apply was clicked
User Manual 94