Wavion WBS-2400 User Manual page 54

Managing Network Interfaces
Figure 3.12 Self Backhaul Configuration page - Central
1. Apply and save changes
2. Reboot the system.
Table- 3.9
Field
Logical Network ID
Cluster ID
PtMP SBH Operation
After you perform all of the above steps the BST should be connected wirelessly via the Wavion
Self-Backhaul link.
Rev 4.0
Self Backhaul configuration - Central
Description
A name that describe the network name
(Suggestion: Enter the name of your company or ISP )
A name that describes the cluster of BST.
(Suggestion :Enter the name of the Central BST, or the BST that is
connected to the GW of the network)
The default mode is Auto
Normal mode is to fine-tuning Point-to-Point Backhaul
Aggressive mode is to fine-tuning Point-to-MultiPoint Backhaul
User Manual 54