Wavion WBS-2400 User Manual page 41

Table- 3.5 Wireless Activity page
Field
Total Tx capacity
Estimated WBS capacity
available
Statistics
Bits
Bytes
Unicast Packets
Non-Unicast Packets
Errors
Discarded
Reset Counters Button
Options
Apply
Save (from the menu
bar)
Cancel
41 Wavion
Description
The calculated average throughput that was achieved (in Kbps)
since the last screen refresh.
The estimated available throughput based on parameters of last
transmissions, SDMA activity and channel parameters. When the
throughput in last transmission and SDMA activity is near zero ,
the field shows the maximum available throughput :
When SDMA is disabled: 29593 kbps.
◊
When SDMA is enabled: 51200 kbps
◊
Total amount in Transmission and Reception of the following
parameters
The number of bits transmitted/received.
The number of bytes transmitted/received.
The number of Unicast Packets transmitted/received.
The number of Non-Unicast Packets transmitted/received.
The number of errors that occurred during
transmission/reception.
The number of discards that occurred during
transmission/reception.
Resets the counters. In order to see new numbers refresh the
page.
Click to have your changes take effect temporarily
Click to have your changes remain in effect after a reboot
Click to clear your changes; this is only possible if Apply or Save
were not clicked
Managing Network Interfaces