Wavion WBS-2400 User Manual page 55

Remote Configuration
1. Set the BST role to Remote
The page will change automatically to Remote BST configuration page.
2. Configure the Network BST name (for identifying the BST in the central link stations list)
2.1. Logical network ID
3. Configure the Central BST to connect with:
3.1. Manually – insert the MAC address of central BST and push the Scan button
3.2. Automatically - run the Remote-Scan
Figure 3.13 Self Backhaul Configuration page - Remote
To verify the connection qualities go to page:
Network Interfaces
The connection between the BST should be good or better.
55 Wavion
Self Backhaul Connected BST
Managing Network Interfaces