The default VLAN has the VLAN ID equal to 1, but by default the tagging is disabled leaving the
data untagged.
By default, all management traffic to and from WBS-2400 is on VLAN ID 1. It is a good practice
to create a VLAN dedicated to the management of the unit. See Management VLAN section for
more information.
The following pages describe the process to set VLAN. Pictures and indications refer to SSID
mode. The process in BSSID mode is the same.
Configuring VLAN
To configure a VLAN
From the main SSID-VLAN Select an SSID name to edit its parameters (e.g. TechS-2) to
edit its parameters.
Figure 4.10
1.
Click Add VLAN at the bottom right of the window to configure the VLAN Parameters. The
Related VLAN section of the page is displayed.
77 Wavion
Editing SSID Page with Related VLAN Section
SSID and VLAN configuration