Automatic Channel Selection - Wavion WBS-2400 User Manual

Managing Network Interfaces

Automatic Channel Selection

Figure 3.7 Automatic Channel Selection Page in Standalone Mode
The Automatic Channel Selection (ACS) is a tool for automatic scanning the frequency channels,
and selecting the best channel based on the activity and the interference level of each channel.
It is useful for both standalone deployment and in assisting tool for multi-BST deployment.
The ACS scans the selected channels list, displays the scanned results to the user, and
recommends the best channel for operation.
The scanning activation and results retrieval are available by SNMP to enable centralized
operation of the channel scanning and selection.
How to initiate Scan in Standalone Mode:
Pressing scan button in the ACS page will initiate the scan process. During the process, the
system will reboot to Scan Mode, perform the scan and afterwards will automatically reboot
back to Operational Mode.
Rev 4.0 User Manual 42