Configuring Wpa2 Security; Configuring Radius Server Parameters - Wavion WBS-2400 User Manual

Table- 4.6
Field
RADIUS Server IP
Address
Shared Secret
Options
Apply
Save (from the menu)
Cancel

Configuring WPA2 Security

To configure WPA2 Security
• Click on the SSID-VLAN Menu (See figure below).
• From the Authentication drop down menu, select either WPA2 PSK or WPA2 RADIUS.
• Select AES from the Encryption choice.
• For the Security Keys, select either by Value or by Pass Phrase and enter the appropriate
value
Figure 4.8

Configuring RADIUS Server Parameters

• In case RADIUS Authentication is required choose WPA2 Radius from the Authentication
drop down menu to open the Radius Servers configuration.
• Each SSID can be configured with its own RADIUS server
75 Wavion
RADIUS Servers Configuration
Description
IP Address of the RADIUS Server. If more than 1 address appears
in the list, the following RADIUS Servers are used as backup (only
if the previous RADIUS Servers cannot be reached).
The Shared Secret is a secret that the unit shares with the RADIUS
server. This way, both ends know they are "certified".
Click to have your changes take effect temporarily
Click to have your changes remain in effect after a reboot
Click to clear your changes; this is only possible if Apply or Save
were not clicked
WPA2 Security Mode
SSID and VLAN configuration