Managing Network Interfaces
Table- 3.6
Field
Scan Status
Recommended channel The best channel that was chosen based on scan results. It
Total CCA activity
Noise level
TX failure rate
Rev 4.0
Automatic Channel Selection page
Description
Status of the system mode.
• Not in ACS mode - is shown during
operational mode
• Scanning - is shown during scan
selects the best channel from channels selected in the
"available channel" list. The recommended channel is selected
based both on noise level and channel activity.
Total activity in the selected channel in percentage
Level of the noise as measured by the BST
Percentage of the times that the system failed to transmit due
to the channel's activity
User Manual
44