Wavion WBS-2400 User Manual page 43

How to return to Operational Mode:
The system will automatically return to operational mode with the recommended channel
selected by the ACS algorithm unless the "
checkbox is not checked. In this case the system will return to the previous selected channel
after the scanning.
During any time in which the system is not in operational mode, selecting a channel from
"Operational channel" list-box and pressing reboot will return the system to operational mode
with the selected channel. The list-box appears during the scan.
The following fields appear in the Automatic Channel Selection page:
Table- 3.6
Field
Automatic set to
recommended channel
and reboot
Scan results
43 Wavion
Note: During scan mode the system will not be operational, i.e. clients
will not be able to associate, although beacons will continue to be
transmitted.
Automatic Channel Selection page
Description
Automatic set to recommended channel and reboot
• Enabled - After completion of the frequency
scan, the unit will choose the best fit
frequency and automatically reboot the
system.
• Disabled - The user has to choose a channel
from Channel Selection and reboot to return
unit in Operation.
Managing Network Interfaces
"