Management Vlan - Wavion WBS-2400 User Manual

Make sure that access to the RADIUS Server, including the Shared Secret, is configured
correctly.

Management VLAN

The purpose of the management VLAN is to segment the Management and the Clients data
traffic. It also provides an option for customers to keep an Open SSID for public traffic and
simultaneously manage the WBS-2400 traffic over a separate VLAN (that may be linked to a
secured SSID). The management VLAN can be selected out of the enabled VLAN list.
Note:
WBS-2400 system.
The configuration of the Management VLAN takes effect immediately.
This means that setting the Management VLAN has to be done in 2 steps:
4. Applying the VLAN parameters (external VLAN ID and tagging mode) using the
existing management traffic, and selecting the desired VLAN to be the Management
VLAN on the Administration page. After this stage the current wire-line connection
to the system GUI will drop.
5. Saving the parameters – using the new Management VLAN, i.e. over the tagged
VLAN.
To enable VLAN management
6. Apply the VLAN parameters (external VLAN ID and tagging mode) using the existing
management traffic or create a new VLAN ID.
7. Select the desired VLAN ID for the Management VLAN traffic.
8. Click Apply and Save
Note:
immediately. Therefore setting the Management VLAN is done over the
"old" VLAN (default is VLAN-1 untagged), while saving is done over the
"new" VLAN.
Step 8 has to be done over a different machine over the new VLAN.
81 Wavion
Only one VLAN can be defined as the Management VLAN in the
The configuration of the Management VLAN takes effect
SSID and VLAN configuration