Wavion WBS-2400 User Manual page 46

Managing Network Interfaces
Field
Operational Rate
Rx Rate
Tx Bytes
Rx Bytes
RSSI
Details
Backhaul CPE Link
information
Station's MAC Address
Power Save State
WMM support
WDS
Tx Rate [Mbps]
Rx Rate [Mbps]
SSID
VLAN
UL Quality
DL Quality
Tx[Bytes]
Rx[Bytes]
RSSI[dBm]
Rev 4.0
Description
The rate of the data transmitted to Peer BST on the SBH link.
The rate of the data received from Peer BST on the SBH link.
Amount of bytes transmitted
Amount of bytes received
The symmetrical Rx Signal Level of the link
Details of the Connected BST
MAC (Media Access Control) address of the associated station
Value of Doze in this field indicates that the associated station is in
power save mode
Value of 'yes' in this field indicates that the associated station
supports the WMM protocol. . For more information about working
with QoS please refer to
For this feature the CPE should support WDS. "Yes" will indicate
WDS support
The supported CPE are Ubiquity NS2/PS2 running version 3.2.2, and
Ruckus running version 4.4.2.0.28.
PHY Rate (modulation) at which the base station currently transmits
to the associated station
PHY Rate (modulation) at which the associated station currently
transmits to the base station
SSID to which the associated station is associated (should be the
'backhaul SSID')
VLAN name to which the station is bound. (should be the VLAN of
the 'backhaul SSID')
Quality of the Up Link: Reported by WBS.
Good
◊
Poor
◊
Quality of the Down Link: Reported by CPE
Good
◊
Poor
◊
Number of bytes transmitted by BST to the station
Number of bytes received by the BST from the station
The Received Signal Strength Indicator power received by the BST
from the associated station.
"QoS Packet Priority"
User Manual 46