Wavion WBS-2400 User Manual page 71

Table- 4.4
Field
Identity
Rename SSID/BSSID
SSID/BSSID Index
BSSID
SSID/BSSID Enabled
Backhaul SSID/BSSID
Security Configuration
Authentication
Encryption
Exclude Unencrypted
QoS Packets Priority
71 Wavion
Editing SSID Page
Description
'Wavion' is the default SSID. Set new name for the SSID; the
SSID is case-sensitive, and shorter than 32 characters
It's a chronological numbering for the SSID Table
MAC address attached to the SSID (only in BSSID mode)
SSID #1 is always Enabled. SSID that are not enabled cannot be
accessed from the wireless interface.
Check to enable the SSID/BSSID as a backhaul SSID. The VLAN
configured won't be used at the Ethernet side.
Trunked VLAN must be configured in different SSID/BSSID that
won't be enabled (the VLAN must be enabled).
Open System
Shared Key
Open System + Shared Key
WPA PSK
WPA Radius
WPA2-PSK
WPA2-Radius
WPA2 mixed mode PSK
WPA2 mixed mode Radius
WPA2 mixed mode PSK + Radius
None
WEP/40
WEP/104
TKIP
TKIP+WEP/40
TKIP+WEP/104
AES
AES + TKIP
When this checkbox is marked, the BST drops incoming packets
that are unencrypted.
Choose the type of marking to be used when prioritizing data.
VLAN: Uses 802.1p priority tag.
•
SSID and VLAN configuration