Wavion WBS-2400 User Manual page 73

• Click the Encryption drop down menu and select WEP in the Editing SSID page (See figure
below).
• Select from the Authentication choices either Open or Shared Key. Shared Key is
recommended.
• Select either WEP/40 or WEP/104 from the Encryption choice.
• Enter up to 4 WEP keys. Their length is dependent upon the choice selected in the step
above; WEP/40 is 10 hex characters and WPE/104 is 26 characters.
Figure 4.5
The following fields appear on the Editing SSID WEP page:
Table- 4.5
Field
Security Configuration
WEP Key #
Options
Apply
Save (from the Menu)
Cancel
73 Wavion
WEP Encryption
Editing SSID WEP Page
Description
The key # (1-4) indicates the index of the WEP Key.
The Key value is the hexadecimal value of the WEP key as
stored in HW. For the WEP/40 this key holds 10 hexadecimal
characters, for WEP/104 this key holds 26 hexadecimal
characters.
Click to have changes take effect temporarily
Click to have changes remain in effect after a reboot
Click to clear your changes; this is only possible if Apply or
Save were not clicked
SSID and VLAN configuration