Wavion WBS-2400 User Manual page 47

Field
State
Backhaul CPE
The Backhaul CPE feature allows to create an SSID that together with the CPE associated to it
creates a trunking interface. This interface is capable of tunneling tagged VLAN between the
two ends (CPE and BST).
Only one SSID can be configured as backhaul SSID. The number of VLAN capable to be trunked
is the number of available VLAN in the system (15 in SSID-VLAN mode, 5 in BSSID mode).
It is highly recommended to connect no more than 20 CPE to the backhaul SSID to avoid
bandwidth stagnation.
This feature works only with specific CPE models, as it uses the WDS feature.
The supported CPE are Ubiquity NS2/PS2 running version 3.2.2 and up, and Ruckus running
version 4.4.2.0.28.
Figure 3.9 Backhaul CPE Configuration
How to create a Backhaul SSID:
The backhaul SSID is created through the VLAN-SSID menu. Please refer to SSID-VLAN page
for a detailed description of the SSID-VLAN mechanism.
The steps in order to set the SSID as backhaul are identical whether you are in SSID-VLAN
mode or in BSSID mode.
These steps are shown below in SSID-VLAN mode. In BSSID mode, only some names are
different.
47 Wavion
Description
State of which the station is connected
Managing Network Interfaces