Wavion WBS-2400 User Manual page 88

Viewing Associated Stations
Table- 5.4
Field
Station Identity
Station Association ID
Station MAC Address
Station's Detailed
Information
Retry Limit Reached Counter
Retry Counter
Station's Listen Interval
Time since first packet is
pending if station is in Doze
mode
Last Activity
Inactivity Timeout
RF Switching Related
Information
RX Rate
Rate being used in RTS
Transmission
Beamforming Transmission
related parameters:
Transmission Rate[Mbps]
RSSI[dBm]
SNR[dB]
BRE parameters:
Transmission Rate
Rev 4.0
Station Detailed Information tab
Description
The Association ID (AID) that the client got when its association to
the BST was completed.
MAC (Media Access Control) address of the associated station.
This counter increment every time the Retry Counter (below)
reaches its limit (64).
A counter of the retransmissions to this associated station.
The listen interval of the client specified during association to the
BST.
If station is in Power Save mode, the amount of time for which the
first packet received is waiting to be delivered
Number of minutes since the station was last active.
If a station is not active for this number of minutes, the BST will
de-authenticate it due to inactivity.
Click + sign to display this information/ click - sign to hide
PHY Rate (modulation) at which the associated station currently
transmits to the base station
The PHY rate (modulation) that the BST uses for transmission of
Self-CTS and RTS transmissions to the client.
The PHY rate (modulation) that is used in Beamforming
transmission to this client.
RSSI -- Received Signal Strength Indication as the client is received
by the BST.
SNR -- Signal to Noise Ratio (dB) as the client is received by the
BST.
BRE - Broadcast Range Enhancement. The PHY rate (modulation)
in which the BST broadcasts are being transmitted.
User Manual 88