3.2
Operation Procedures for Functions
3.2.1
Monitor function
The monitoring list appears and you can change from one monitor screen to another and set the first
priority screen.
1
Press
.
The function menu is called.
2
Make sure that the
cursor is located at "1
MONITOR".
If not, move the cursor with
/
.
3
Press
.
The monitoring list is called.
4
Press
or
move the cursor to the
desired item.
Hold down
and press
/
to shift one screen.
1 MONITOR
2 PU Oper
3 Pr.List
4 Pr.Clear
1 Frequency
2 Current
3 Voltage
4 Alarm His
to
1 Frequency
2 Current
3 Voltage
4 Alarm His
Operation Procedures for Functions
5
Press
.
The monitor screen selected
by the cursor appears.
Press
to give the first
priority to this monitor screen.
REMARKS
· The monitoring list can be called only with pressing
in the monitoring mode. (Refer to page 27)
· "4 Alarm His" can not be set to the first priority
monitor.
· When FR-PU07BB is used in the battery mode (the
inverter power is OFF), only frequency setting
monitor is available. (The monitor value other than
frequency setting monitor is always "0".)
· Some monitoring items are not displayed depending
on the connected inverter. To check the available
monitoring items, refer to the setting range of Pr.52
DU/PU main display data selection of the inverter.
READ:List
0.00
A
--- STOP PU
3
59