Mitsubishi Electric FR-PU07 Instruction Manual page 63

Overview of Function Menu
Function Menu
The parameter menu appears, and you can perform "parameter setting", "list
3. Pr.List
display", "parameter change list display" and "initial value list display".
The parameter clear menu appears, and you can perform "parameter clear" and "all
4. Pr.Clear
clear".
5. Alarm Hist This function displays history of past eight faults (alarms).
6. AlarmClear
This function clears all the fault (alarm) history.
7. Inv.Reset This function resets the inverter.
The inverter displays the cause of mismatch between inverter operation and control/
8. T/Shooting
setting or the cause of an inverter fault.
9. S/W This function displays the software control number of the inverter.
FR-PU07
10. Selectop
FR-PU07BB
battery mode
FR-PU07
11. Option
FR-PU07BB
battery mode
12. FRCpy set The function can perform the "parameter copy" (read, write, verification).
REMARKS
The functions vary with the inverter model and may be invalid for some inverters.
54
Description
This function displays the signals assigned to the I/O terminals of the
control circuit and the ON/OFF states of the signals.
This function displays the signals assigned to the I/O terminals of the
control circuit. The ON/OFF states of the input signal are not
displayed.
This function displays the option fitting states of the option connectors
1 to 3.
Option cannot be displayed since it cannot be recognized.
Refer To
Page 62
Page 65
Page 67
Page 68
Page 69
Page 69
-
Page 74
Page 75
Page 76