Mitsubishi Electric FR-PU07 Instruction Manual page 87

Operation Procedures for Functions
• Writing the parameter setting stored in FR-PU07
to the inverter
1
Connect the FR-PU07 to the copy destination
inverter.
2
Press .
The function menu appears.
3 Select the "PRCpy set".
/
Using , move the
cursor to "12 PRCpy set" and
press .
4 Select the copy area.
Point the cursor to the copy
area that stores the
parameter settings to be
written to the inverter, and
press .
5 Select the "WRITE".
Using / , point the
cursor to "2 Write VFD" and
press .
78
1 MONITOR
2 PU Oper
3 Pr.List
4 Pr.Clear
9 S/W
10 Selectop
11 Option
12 PRCpy set
· Overwriting the data of the FR-PU07 deletes the
1 Copy area 1
2 Copy area 2
3 Copy area 3
Copy area 1
1 Read VFD
2 Write VFD
3 Verifing
6
Writing the parameter
settings is selected, and the
confirmation screen for
writing is displayed.
7
Press .
The parameter settings
stored in the FR-PU07 are
copied to the copy destination
inverter.
8
Reset the inverter. (Refer to page 69)
CAUTION
previous data.
REMARKS
· The parameter settings of three inverters can be
stored in areas 1 to 3.
· Read and write cannot be stopped during execution.
· If power is switched OFF, parameter data stored in
the parameter unit remains unerased.
012
Area 1 to VFD
WRITE:Executing
ESC:Cancel
Param Copy
Writing
Completed Completed
Please Reset