3.2
Operation Procedures for Functions
3.2.1 Monitor function
The monitoring list appears and you can change from one monitor screen to another and set the first priority screen.
Description
Press the FUNC-key.
The function menu is called.
Make sure that the cursor is located at
"1 MONITOR".
If not, move the cursor with the Cursor-
keys ▲/▼.
Press the READ-key.
The monitoring list is called.
Press the Cursor-keys ▲ or ▼ to move
the cursor to the desired item.
Hold down the SHIFT-key and press
the Cursor-keys ▲/▼ to shift one
screen.
Display
Description
Press the READ-key.
1
MONITOR
The monitor screen selected by the cur-
2 PU Oper
sor appears. Press the WRITE-key to
3 Pr.List
give the first priority to this monitor
4 Pr.Clear
screen.
REMARKS
1
Frequency
The monitoring list can be called only with pressing the READ-key in
2 Current
3 Voltage
the monitoring mode. (Refer to page 15).
4 Alarm His
"4 Alarm His" can not be set to the first priority monitor.
1 Frequency
2
Current
3 Voltage
4 Alarm His
FUNCTION MENU
Display
READ:
List
0.00
A
--- STOP PU
3
47