Frequency Setting
2.2.3
Precautions for frequency setting
1) Pr. 79 Operation mode selection must have been set to switch to the PU operation. (Refer to the inverter
instruction manual for details of Pr. 79 .)
2) In the monitor mode, you cannot make the direct setting (Refer to page 30) to set the running frequency.
Perform the step setting (Refer to page 31) and press
screen before frequency setting.
32
Monitor mode
Deselect monitor mode
READ:List
30.00
Hz
STF FWD PU
, or press
to display the frequency setting
Frequency setting screen
Freq Set
SET
0.00Hz
0~400Hz