Mitsubishi Electric FR-PU07 Instruction Manual page 38

Factory setting
* The monitor displayed at powering ON is the first priority monitor. Refer to page 26 for the setting method
of the first priority monitor.
1) For the set value of "17, 18, 24", their monitors are displayed at the second monitor instead of output
current monitor.
First priority monitor
Output frequency monitor
2) For the set value of "19 to 23, 25
voltage monitor.
First monitor
Output frequency monitor
REMARKS
The setting range of Pr. 52 DU/PU main display data selection differs according to the inverter.
Refer to the inverter instruction manual for details.
First priority monitor
READ:List
0.00
Hz
--- STOP EXT
(Output frequency monitor) (Output current monitor)
First
1)
Second monitor
Monitor of the set value "17, 18, 24"
", their monitors are displayed at the third monitor instead of output
·····
Second monitor
Output current monitor
Second monitor
READ:List
0.00
A
--- STOP EXT --- STOP EXT
(Output voltage monitor)
Second
2)
Output voltage monitor
Third monitor
Monitor of the set value "19 to 23, 25
Monitoring Function
Third monitor
READ:List
0.00
V
Third
Third monitor
.....
"
2
29