Parts Identification And Functions Of The Operation Panel; Operation Mode Switching - Mitsubishi Electric FR-C500 Instruction Manual

P arts Ide ntification and Fu nc tio n s of the O pe ration
P an el
2.1 Parts Identification and Functions of the
Operation Panel
The operation panel cannot be removed from the inverter.
Monitoring 3-digit LED
Displays frequency,
parameter number, etc.

2.2 Operation Mode Switching

PU
Using , switch between the "PU operation mode" and "external operation mode".
EXT
External
operation mode
The PU indication is lit in the PU operation mode.
The EXT indication is lit in the external operation mode.
REMARKS
Operation mode switching that can be performed using
other than 0 (factory setting). (Refer to page 75.)
RUN
PU
PU
EXT
EXT
RUN
STOP
P.RUN
RESET
L.RUN
SD
CC-Link
RD
L.ERR
MODE SET
Used to switch setting mode.
PU
PU
EXT
operation mode
42
Used to switch between PU and
external operation modes. When
using external operation mode,
press this key to light up EXT
indication.
PU: PU operation mode
EXT: External operation mode
Run command forward rotation.
Set reverse rotation using Pr. 17.
Used to stop operation or reset
alarm.
Used to switch monitor or
display data.
PU
is disabled if the Pr. 79 setting is
EXT