Functions Available In Operation Modes 19 - Mitsubishi Electric DeviceNet FR-E5ND Instruction Manual

4.3 Functions Available in Operation Modes
The functions of the drive depend on the mode of the inverter. The following chart indicates the available commands
according to the inverter operation mode.
Control type
DeviceNet Operation command
Output freq. setting
Monitor
Parameter write
Parameter read
Inverter reset
External terminals Operation command
Output freq. setting
Inverter reset
Note 1: Depends on value of Pr. 338 and Pr. 339
Note 2: The Inverter cannot be reset if computer link communication error has occurred
Note 3: As set in Pr. 77
Command type Net mode
Yes (note 1)
Yes (note 1)
Yes
Yes (note 3)
(while stopped)
Yes
Yes (note 2)
Yes (note 1)
Yes (note 1)
Yes
Operation mode
External mode
No
No
Yes
No (note 3)
Yes
No
Yes
Yes
Yes
19
OPERATION
PU mode
No
No
Yes
No (note 3)
Yes
No
No
No
Yes