Step Setting - Mitsubishi Electric FR-PU07 Instruction Manual

2.2.2

Step setting

Change frequency continuously using
You can change the frequency only while you press
can be used for fine adjustment.
1
Press .
The frequency setting screen
appears.
2
Press to enter
/
a desired value (60.00Hz).
You can set any value
between the maximum
frequency (Pr. 1 ) and
minimum frequency (Pr. 2 ).
3
Press .
The 60Hz setting is complete.
/ .
/ . Since the frequency changes slowly at first, this setting
REMARKS
Freq Set
Change of frequency can be made during operation by
SET 0.00Hz
the step setting. However, pressing
0~400Hz
monitor mode may cause actual set frequency to be
higher/lower from the indicated frequency on the
monitor. When performing the step setting at monitor
Freq Set
mode, make sure that output frequency is following the
SET 0.00Hz
set frequency.
60.00Hz
0~400Hz
Freq Set
SET 60.00Hz 60.00Hz
Completed
Frequency Setting
/ at
31
2