Using The Parameter To Change The Monitor (Pr. 52) - Mitsubishi Electric FR-PU07 Instruction Manual

Monitoring Function
2.1.5

Using the parameter to change the monitor (Pr. 52)

To change the third monitor (output voltage monitor), set Pr. 52 DU/PU main display data selection.
(Note that setting "17" (load meter)
change the output current monitor.
"Output voltage monitor" monitor displays from the first priority monitor using
*1 Cannot be monitored for the FR-F700 series.
*2 Cannot be monitored for the FR-E700, D700 series.
REMARKS
Refer to the instruction manual of each inverter for monitor description.
28
, "18" (Motor excitation current)
*2
, and "24" (Motor load ratio)
*1 *2
.