Setting And Changing The Parameter Values; Specifying The Parameter Number To Change The Set Value - Mitsubishi Electric FR-PU07 Instruction Manual

2.3

Setting and Changing the Parameter Values

Using the FR-PU07/FR-PU07BB allows you to read the parameter of inverter or change the set value
easily. Refer to the inverter instruction manual for details of the parameters.
2.3.1

Specifying the parameter number to change the set value

Example: When changing 5s to 180s at the Pr. 8
Deceleration time setting
1
Press .
The frequency setting screen
appears, and operation mode
changes to PU operation mode.
(You need not press
the parameter unit is already in
the PU operation mode.)
2
Press .
The parameter unit is in the
parameter setting mode.
3
Press .
Enter the desired parameter
number.
4
Press .
The present setting appears.
Freq Set
SET 0.00Hz
0~400Hz
when
SETTING MODE
0~9:Ser Pr.NO.
Select Oper
SETTING MODE
Pr.NO.
8
<READ>
8 Dec.T1
5.0S
0~3600
Setting and Changing the Parameter Values
5 (1) Direct setting
Press
Enter the desired value.
Or
(2)Step setting
Press .
Display "180" using
6
Press .
The set value is changed.
7
Press to display the
next parameter.
* If you entered an incorrect value, press
to the pre-entry state.
.
*
8 Dec.T1
5.0S
180S
0~3600
.
8 Dec.T1
180.0S 180.0S
Completed
9 Set THM
2.55A
0~500
to return
2
33