Usb Controller; Usb Keyboard Support; Ac97 Audio; Init Display First - Albatron PM845GV1 User Manual

INTEL OnChip PCI Device
Highlighting the "Intel On-Chip PCI Device" label and then press "Enter", it will take
you a submenu with the following options:

USB Controller

This option should be enabled if your system has a USB device installed on the system
board. You will need to disable this feature if you add a higher performance controller.
Options: Enabled (default), Disabled.
USB 2.0 Controller
This option should be enabled if your system has a USB 2.0 device installed on the
system board. You will need to disable this feature if you install a USB 1.1 device.
Options: Enabled (default), Disabled.

USB Keyboard Support

Enables support for USB attached keyboards. Options: Enabled (default), Disabled.

AC97 Audio

This option allows you to control the onboard AC97 audio.
Options: Auto (default), Disabled.
Onboard LAN Device
This option allows you to enable (default) / disable the onboard LAN Device.

Init Display First

With systems that have multiple video cards, this option determines whether the primary
display uses a PCI Slot or onboard/AGP (onboard).
PM845GE1 => Options: PCI Slot, Onboard/AGP (default)
PM845GV1/ PM845GL1/ PM845GL1-533=> Options: PCI Slot, Onboard (default)
Onboard I/O Chip Setup
PWRON After PWR-Fail
This field will determine whether your system will boot after restoring power after a
power failure. If you select "On", the system will boot whether or not the system was on
before power failure. If you select "Former-Sts", the system will be restored to the status
before the power failure. Options: Off (default), On , Former-Sts.

Power On Function

This allows you to select a "Power On" option for your computer. Options: Password,
Hot KEY, Mouse Left, Mouse Right, Any KEY, BUTTON ONLY, and Keyboard 98.

KB Power ON Password

Supply a password that your system will use as part of the power-on sequence.
PM845GV1/ PM845GE1/ PM845GL/1 PM845GL1-533
30