HOT Key Power ON
This option allows you to use the Ctrl key along with a hot key (function key) to power
on your system. Options: Ctrl – F1, Ctrl – F2, Ctrl – F3, ... to Ctrl – F12.
Onboard FDC Controller
Select "Enabled" if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If you install an add-in FDC or the system has no
floppy drive select "Disabled". Options: Enabled (default), Disabled.
Onboard Serial Port 1
Select an address and corresponding interrupt for the first serial port. Options: Disabled,
3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Auto.
Onboard Parallel Port
This item allows you to determine the onboard parallel port controller I/O address.
Options: Disabled, 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7.
Parallel Port Mode
This item allows you to select a parallel port mode for the on board parallel port.
EPP
ECP (default)
SPP
ECP+EPP
Normal
EPP Mode Select
Select EPP port type 1.7 or 1.9 (default).
ECP Mode Use DMA
Select a DMA Channel for the port. Options: 3 (default), 1.
Game Port Address
Set the Game Port I/O Address. Options: Disabled, 201 (default), 209.
Midi Port Address
Set Midi Port Base I/O Address. Options: Disabled, 330, 300 (default), 290.
Midi Port IRQ
Set the Midi Port IRQ. Options: 5, 10 (default).
PM845GV1/ PM845GE1/ PM845GL/1 PM845GL1-533
Using Parallel Port as Enhanced Parallel Port.
Using Parallel Port as Extended Capabilities Port.
Using Parallel port as Standard Printer Port.
Using Parallel port as ECP & EPP mode.
31