Cpu Processor Installation - Albatron PM845GV1 User Manual

CPU Processor Installation

This mainboard supports Intel
Before installation of your CPU, we suggest you visit the Intel website and review the
processor installation procedures.
CPU Socket-478 Configuration Steps:
1. Locate the CPU socket on your mainboard and nudge the lever away from the
socket. Then lift the lever to a 90-degree angle.
2. On the socket, locate the corner that has the pin-1 receptor. This corner will
have a cut-corner on the rectangular shaped pattern of pin holes on the socket.
Match the dot on the CPU with the pin-1 receptor on the socket and lower the
CPU onto the socket. The bottom of CPU should be flush with the face of socket.
Pin1 Receptor
3. Lower the lever until it snaps back into position. This will lock down the CPU.
4. Smear thermal grease on top of the CPU. Lower the CPU fan onto the CPU
and use the clasps on the fan to attach it to the socket. Finally, extend the
power cable from the fan and insert it onto the CPUFAN adapter.
Attention: Overheating can damage the CPU and other sensitive
components. Verify that the heatsink is properly installed and make sure
the CPU fan is connected.
PM845GV1/ PM845GE1/ PM845GL/1 PM845GL1-533
® ®
Pentium 4 processors using a Socket-478.
http://www.intel.com
8
Dot