Ide Hdd Block Mode; Usb Controller - Albatron PM266A PRO User Manual

Via supports socket 478 intel pentium 4 processor
Hide thumbs Also See for PM266A PRO:
Table of Contents

Advertisement

PM266A PRO/ PM266A
Primary/Secondary/Master/Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for each of the IDE
devices that the onboard IDE interface supports. Modes 0 to 4 will increase performance
incrementally. In Auto mode, the system automatically determines the best mode for each device.
Options: Auto (default)、Mode0、Mode1、Mode2、Mode3、Mode4.
Primary / Secondary /Master / Slave UDMA
Ultra DMA/133 functionality can be implemented if it is supported by the IDE hard drives in your
system. As well, your operating environment requires a DMA driver (Windows 95 OSR2 or a third
party IDE bus master driver). If your hard drive and your system software both support Ultra
DMA/133, select "Auto" to enable BIOS support.
Options: Auto (default)、Disabled

IDE HDD Block Mode

Block mode is otherwise known as block transfer, multiple commands, or multiple sector read/write.
Select the "Enabled" option if your IDE hard drive supports block mode (most new drives do). The
system will automatically determine the optimal number of blocks to read and write per sector.
Options: Enabled (default)、Disabled
Onboard PCI Device
If you highlight the "Onboard PCI Device" label and then press the enter key, it will take you a
submenu with the following options:
AC'97 Audio
This option allows you to control the onboard AC'97 audio.
Options: Auto (default)、Disabled
Onboard LAN Device
This option allows you to control the onboard LAN device.
Options: Enabled (default)、Disabled

USB Controller

This option should be enabled if your system has a USB port installed on the system board. You will
need to disable this feature if you add a higher performance controller.
Options: All Enabled (default)、All Disabled、1&2 USB Port 、 2&3 USB Port 、 1&3 USB Port 、 1 USB
Port、2 USB Port、3 USB Port
32

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pm266a

Table of Contents