Onboard Device; Usb Controller; Usb Keyboard Support; Onboard Lan Boot Rom - Albatron PX848 Like Series User Manual

PX848 Like Series
IDE Primary / Secondary /Master / Slave UDMA
Ultra DMA/100 functionality can be implemented if it is supported by the IDE hard drives in your
system. As well, your operating environment requires a DMA driver (Windows 95 OSR2 or a third
party IDE bus master driver). If your hard drive and your system software both support Ultra
DMA/100, select "Auto" to enable BIOS support. Options: Auto (default)、Disabled

Onboard Device

USB Controller

This option should be enabled if your system has a USB port installed on the system board. You will
need to disable this feature if you add a higher performance controller.
Options: Enabled (default)、Disabled
USB 2.0 Controller
This option should be enabled if your system has a USB 2.0 device installed on the system board.
You will need to disable this feature if you install a USB 1.1 device.
Options: Enabled (default)、Disabled

USB Keyboard Support

Enables support for USB attached keyboards. Options: Disabled (default)、Enabled
Onboard Audio Device
This item allows you to control the onboard audio. Options: Auto (default)、Disabled

Onboard LAN Boot ROM

Decide whether to invoke the boot ROM of the onboard LAN chip. Options: Disabled (default)、
Enabled
Onboard I/O Chip Setup

Power ON Function

This option allows you to select a way to power on your computer. Options: Password、Hot KEY、
Mouse Left、Mouse Right、Any KEY、BUTTON ONLY (default)、Keyboard 98
KB Power On Password
Supply a password that your system will use as part of the power-on sequence. This field is only
configurable when "Power On Function" is set to "Password". The password limitation is 3 bytes.
And you have to press and hold the password one by one but in order.
30